In Guadeloupe, power plugs and sockets (outlets) of type C, type D and type E are used. The standard voltage is 230 V at a frequency of 50 Hz.
230 V
50 HzGuadeloupe is a stunning archipelago in the Caribbean, known for its beautiful beaches, lush rainforests, and vibrant culture. With its mix of French and Caribbean influences, Guadeloupe offers a unique and unforgettable travel experience.
To ensure your electronic devices stay powered up throughout your Guadeloupe adventure, it's essential to understand the local power system. This guide will provide you with the information you need to choose the right power adapter and avoid any potential damage to your valuable gadgets.
Guadeloupe uses three different plug types: C, D, and E. Plug type C features two round pins, while plug type D has three round pins, with one larger than the other two. Plug type E, also known as the "Schuko" plug, has two round pins with two earth clips on the side. Although all three plug types are used, type C is the most common and widely available.
The standard voltage in Guadeloupe is 230 volts and the frequency is 50 Hz. This means that electrical appliances designed for use in Guadeloupe will operate at these specifications. If you are traveling to Guadeloupe with electronic devices from a country with a different voltage or frequency, you will need to use a power adapter and possibly a voltage converter to ensure safe and proper operation of your devices.
This Universal Travel Adapter is the ultimate travel companion for anyone exploring the globe. With its comprehensive selection of plugs covering over 150 countries, including Guadeloupe, you can stay connected and powered up no matter where your travels take you.
This adapter is equipped with multiple USB ports and a standard socket, allowing you to charge multiple devices simultaneously. This makes it perfect for powering your phone, laptop, tablet, camera, and more, ensuring all your essential electronics are ready to go in Guadeloupe and beyond.
The adapter features a built-in fuse, safety shutters, and a plug lock system, prioritizing safety for your devices. While it doesn't convert voltage, it supports a wide range of devices, providing a reliable and secure charging solution for your travels.
The electrical system in Guadeloupe operates on a voltage of 230 volts and a frequency of 50 Hz. This is the standard electrical system used in most of Europe, Africa, and parts of Asia.
If your electronic devices are designed to operate on 230 volts and 50 Hz, then you will not need a voltage converter. However, if your devices are designed for a different voltage or frequency, such as 110 volts and 60 Hz common in North America and Japan, then you will need a voltage converter to avoid damaging your appliances.
It's always best to check the voltage and frequency requirements of your specific devices before traveling to Guadeloupe. You can usually find this information on the device itself or in the user manual. If you are unsure, it is always better to err on the side of caution and bring a voltage converter.
In Guadeloupe, power plugs and sockets of type C, type D and type E are used.
In Guadeloupe, the standard electrical voltage is 230 V with a frequency of 50 Hz.
Look for a label or sticker on the appliance that indicates the voltage range it can operate on. The label will typically state the voltage range in volts, such as "110-240V" or "AC 100-240V". If the label specifies a single voltage, such as "120V", then the appliance is not dual voltage rated.
Guadeloupe uses the same voltage as the United States, 120 volts. You will not need a voltage converter. However, you may need a plug adapter as the outlets in Guadeloupe use different plug types than the United States.
A voltage converter changes the voltage of AC power by converting it to DC, then back to AC at a different voltage. A transformer directly changes the voltage of AC power without converting it to DC. Voltage converters are used when the frequency of the power source is different from the desired frequency, while transformers are used when only the voltage needs to be changed.
